---- riverside <riverside@southslope.net> wrote:
One note on the stainless braided line. Check the routing as anything it rubs
against it will slowly ground away or through including aluminum castings and
plastic parts.
A bit of shrink tube over the hose at the chaff points fixes it though.
=============
Mega dittos on Smith's book.
Been my bible for decades.
art de armond
----- Original Message -----
From: "TeriAnn J. Wakeman" <tjwakeman@gmail.com>
To: "FOT" <fot@autox.team.net>
Sent: Thursday, March 11, 2010 9:11 AM
Subject: Re: [Fot] explaination of fittings...
> Bobby Whitehead wrote:
>> Could someone point me in the right direction to understanding the
>> fittings used on our race cars...
>>
> I very highly recommend a book titled:
>
> Carroll Smith's Nuts, bolts, fasteners and plumbing Handbook" MBI
> Publishing Company, copyright 1990.
>
> Reading it convinced me that I was just the rawest neophyte when it came
> to the subjects and half of everything I had been told wasn't correct.
> The book takes some effort to wade through but it is more than worth the
> effort.
>
> Teriann
>
> _______________________________________________
> fot@autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/fot/riverside@southslope.net
_______________________________________________
fot@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/kaskas@cox.net
--
Never be beaten by equipment
_______________________________________________
fot@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|