Ted,
Can you ship the new one first and let me return the old one in that same box?
It would save me having to find a suitable shipping container.
And I did know that it was 7.25" :)
Joe
Ted Schumacher wrote:
>
> joe, we will be happy to supply a stock lining disc. just return you disc and
>we will ship out a disc with stock lining. btw, it is a 7
> 1/4" not 7 1/2" size. your only cost will be the shipping. ted
>
> Joe Curry wrote:
>
> > Well gang,
> >
> > After 12 times pulling the gearbox to try different shims between the
>clutch and flywheel to try to resolve the slipping clutch, I
> > GIVE UP!!!
> >
> > The Kevlar Disk I bought from Ted Schumacher is going into the Trash as
>soon as I get the gearbox out again.
> >
> > My conclusion is that Kevlar is not a good material for clutches to be made
>of. It appears that it is much too slippery for a stock
> > pressure plate. Maybe if I wanted to spend several hundred bucks for a
>competition pressure plate I could get it to work. But I
> > don't!
> >
> > So it leaves me with where to find a stock 7 1/2" disk with the i inch 10
>spline center to fit a GT6. Surely there is someone out
> > there who can make such a product.
> >
> > ANy leads will be greatly appreciated. I would like to finally be able to
>run this thing that I have put so much time, effort and
> > money into!!!
> >
> > Regards,
> > Joe Curry
>
> --
> Ted Schumacher
> tedtsimx@q1.net
> http://www.tsimportedautomotive.com
> Fax: 419/ 384-3272 (24 hrs.)
> Phone: 800/ 543-6648 (US & Canada)
> Tech/Gen Info/Worldwide: 419/ 384-3022
>
> ******************************************************
> New - used - rebuilt - performance British car parts.
> 200-300 cars in our British salvage yard.
|