joe, we will be happy to supply a stock lining disc. just return you disc and
we will ship out a disc with stock lining. btw, it is a 7
1/4" not 7 1/2" size. your only cost will be the shipping. ted
Joe Curry wrote:
> Well gang,
>
> After 12 times pulling the gearbox to try different shims between the clutch
>and flywheel to try to resolve the slipping clutch, I
> GIVE UP!!!
>
> The Kevlar Disk I bought from Ted Schumacher is going into the Trash as soon
>as I get the gearbox out again.
>
> My conclusion is that Kevlar is not a good material for clutches to be made
>of. It appears that it is much too slippery for a stock
> pressure plate. Maybe if I wanted to spend several hundred bucks for a
>competition pressure plate I could get it to work. But I
> don't!
>
> So it leaves me with where to find a stock 7 1/2" disk with the i inch 10
>spline center to fit a GT6. Surely there is someone out
> there who can make such a product.
>
> ANy leads will be greatly appreciated. I would like to finally be able to
>run this thing that I have put so much time, effort and
> money into!!!
>
> Regards,
> Joe Curry
--
Ted Schumacher
tedtsimx@q1.net
http://www.tsimportedautomotive.com
Fax: 419/ 384-3272 (24 hrs.)
Phone: 800/ 543-6648 (US & Canada)
Tech/Gen Info/Worldwide: 419/ 384-3022
******************************************************
New - used - rebuilt - performance British car parts.
200-300 cars in our British salvage yard.
|