I have an organic rust remover that works great. My concern is the rust
re-appearing. Whould I not worry about that, or should I treat with some thing
to inhibit and then have to worry about that stuff eventually getting lose and
into the tank...
--
Tim
Belleville, WI.
'70 SPL AND SRL
Still clueless but always learning
---- oliver <sumton@sbcglobal.net> wrote:
=============
if the neck is a separate part you can soak it with this stuff. will remove
all rust.
http://www.ranteer.com/davescars/datsun/DSCN3628.JPG
----- Original Message -----
From: "Tim" <tputland@charter.net>
To: "datsun-roadsters: autox.team.net" <datsun-roadsters@autox.team.net>
Sent: Saturday, August 22, 2009 1:32 PM
Subject: [Roadsters] gas filler neck
>I want to switch to the filler neck from my 69 part car so I can use one of
>my locking chrome gas caps (these don't stay on the filler neck from a
>70--don't ask me how I know...).
>
> The neck I have has a fair amount of rust on the inside. What, if
> anything, should I do about the rust? Should I clean it out as best I can
> and leave it? Or is there something, like POR15, that I could use to treat
> the inside of the neck? Or will anything I try to treat with eventually
> end up in the gas tank?
>
> TIA
>
> Tim
> Belleville, WI.
> '70 SPL AND SRL
> Still clueless but always learning
> ________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as sumton@sbcglobal.net
>
> Datsun-roadsters mailing list
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/datsun-roadsters
________________________________________
Support Team.Net http://www.team.net/donate.html
Datsun-roadsters mailing list
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/datsun-roadsters
|
