datsun-roadsters
[Top] [All Lists]

Re: [Roadsters] Overheating question

To: Matthew Cox <oscilloscope500@yahoo.com>
Subject: Re: [Roadsters] Overheating question
From: John F Sandhoff <sandhoff@csus.edu>
Date: Wed, 17 Oct 2007 21:20:14 -0700 (PDT)
> My car has rapidly overheated (in 3-4 minutes) the past couple of
> times I have driven it...

Do a compression test. This really sounds like you blew a head gasket :-(

With everything together and the radiator cap off, at idle do you see
bubbles in the coolant? That would be exhaust gas from a bad gasket...

> ...when I opened the oil filler cap and looked in there and it didn't
> look terribly wet.

Hmmm - sorry, I didn't note: 1600 or 2000? Either way it should be
good and slimy up there. On a 2000 the spinning camshaft will throw
oil all about - if you leave the cap off while it's idling, you'll
quickly know it :-)

On the 1600, there's an oil flow adjuster that if it's screwed down
it'll starve the valve train.

If the bearings are really bad you'll have great flow and zip pressure.
No pressure = nothing to the top end, and likely not much to the
cylinder walls. That could heat things up quickly :-(

-- John
     John F Sandhoff sandhoff@csus.edu  Sacramento, CA
________________________________________


Datsun-roadsters mailing list

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/datsun-roadsters

<Prev in Thread] Current Thread [Next in Thread>