I'm 6'4" and only a bit lighter. I found that if you re-drill the
mounting points for the seat tracks about 3.5" (maximum) aft of the
stock location, the seat track remains flat to the floor and the seat
back just buts up against the package shelf. You can also fiddle with
the seat rake angle to maximize leg room. If you try to move the eats
back any further, the seat tracks don't stay in contact with the floor
pan (or so I recall; this was accomplished about 25 years ago...)
- Bob Mann
Will Slater wrote:
>
> I am 6'3" and weigh 250# so getting into my Roadster
> is not as easy as I'd like. It would help if I could
> move the seat back quite a bit furher. Is it possible
> to remove the front of the package shelf and so
> increase the room for the seats to go back futher? Has
> anyone done this?
> Will
> '68 2L
> PS
> We had a beautiful day in the high 70's here in NW OH
> unfortunately cool weather and rain is on the way. So
> I took a great top down aternoon ride through some
> backroads. It may be the last till spring sigh ...
|