Lee,
Is this solid wire the same as the .055" piano, or model airplane control wire,
you would purchase at a hobby shop? How long have you been using it?
Also, when you change the wire, can the cable jacket be changed as well? 1.8 mm
ID bicycle cable jacket works great for the heater cables when mated with 0.055"
piano wire. With the nylon interior jacket things move nicely. Can I change
the
outer jacket when I change the wire?
Tom
69 2000
Portland
Lee Ehinger wrote:
> I used a solid stiff wire... no more fraying..
> Lee Ehinger
> Ft Wayne IN
>
> -----Original Message-----
> From: owner-datsun-roadsters@autox.team.net
> [mailto:owner-datsun-roadsters@autox.team.net]On Behalf Of James M Koken
> Sent: Sunday, April 13, 2003 3:32 PM
> To: datsun-roadsters@autox.team.net
> Subject: choke cable
>
> There is a plate that presses in to the end of the handle, tap the plate out
> and the assy comes apart. Replace with a long bike cable that you can thread
> through the inner "keeper" . Oil/grease the inside of the handle and it all
> goes back together the same way it came apart. Cut the ends of the cable
> with
> sharp cutters and is should fray. Solder the ends if you want, using flux to
> get the cable clean.
> Mike K
> 75 degrees
> Colo. Spgs
/// datsun-roadsters@autox.team.net mailing list
/// Archives at http://www.team.net/archive
|