Sounds like the pressure plate gave out. I've had this happen before.
Suddenly you have a real "easy" clutch pedal.
Mike K.
Colo. Springs
----- Original Message -----
From: <Mtbdavid2@aol.com>
To: <datsun-roadsters@autox.team.net>
Sent: Saturday, August 10, 2002 9:04 PM
Subject: need help with cluth problems
> Hi all,
> I have a 1969 2000 Roadster which is falling apart on me. Last week I
> changed the tranny fluid and the next day while driving on the freeway the
> clutch pedal suddenly dropped about half way to the floor. The clutch
fluid
> was still full and didn't appear to be leaking anywhere. I decided to
> replace the clutch master and slave cylinder and also the hose on the
slave
> cylinder. I bled the system many, many times and still can't get the car
to
> go into gear. If I adjust the nut on the slave cylinder bolt all the way
out
> so there is no free-play in the arm going into the tranny then I can get
into
> most of the gears except reverse but then the clutch seams to be dragging.
> Any ideas what has gone wrong and how to fix it? Maybe my clutch has gone
> bad all of a sudden?
> Thanks,
> David
>
> /// datsun-roadsters@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Send list postings to datsun-roadsters@autox.team.net
/// datsun-roadsters@autox.team.net mailing list
|