Sounds like you still have a bubble in the master. You have to bleed the master
before you bleed the slave cylinder.
Gordon Glasgow
Renton, WA
> -----Original Message-----
> From: owner-datsun-roadsters@autox.team.net
> [mailto:owner-datsun-roadsters@autox.team.net]On Behalf Of
> Mtbdavid2@aol.com
> Sent: Saturday, August 10, 2002 9:04 PM
> To: datsun-roadsters@autox.team.net
> Subject: need help with cluth problems
>
>
> Hi all,
> I have a 1969 2000 Roadster which is falling apart on me. Last week I
> changed the tranny fluid and the next day while driving on the freeway the
> clutch pedal suddenly dropped about half way to the floor. The clutch fluid
> was still full and didn't appear to be leaking anywhere. I decided to
> replace the clutch master and slave cylinder and also the hose on the slave
> cylinder. I bled the system many, many times and still can't get the car to
> go into gear. If I adjust the nut on the slave cylinder bolt all the way out
> so there is no free-play in the arm going into the tranny then I can get into
> most of the gears except reverse but then the clutch seams to be dragging.
> Any ideas what has gone wrong and how to fix it? Maybe my clutch has gone
> bad all of a sudden?
> Thanks,
> David
>
> /// datsun-roadsters@autox.team.net mailing list
> /// Send admin requests to majordomo@autox.team.net or go to
> /// http://www.team.net/cgi-bin/majorcool
> /// Send list postings to datsun-roadsters@autox.team.net
/// datsun-roadsters@autox.team.net mailing list
|