You did'nt warn him not to soak the carbs for a couple of days. He may
think it's ok to do that. Pat
-----Original Message-----
From: sidney raper <spl310@hotmail.com>
To: andycost@att.net <andycost@att.net>; datsun-roadsters@autox.team.net
<datsun-roadsters@autox.team.net>
Date: Thursday, March 22, 2001 9:01 AM
Subject: Re: mikuni jets
>Sounds like they are shot. Best just box them up and send them to me!
>
>Seriously, I don't know the answer, but I have a suggestion. Get a can of
>the carb cleaner and let them soak for a couple of days (the can with the
>basket - not the spray can!) The carb cleaner from Napa works well for me.
>Once they have soaked, gingerly blow them out with compressed air and you
>should be fine.
>
>Sid
>
>
>>From: andycost@att.net
>>Reply-To: andycost@att.net
>>To: datsun-roadsters@autox.team.net
>>Subject: mikuni jets
>>Date: Thu, 22 Mar 2001 14:12:32 +0000
>>
>>I have an older set of solexes. I took the jets out to
>>clean them and am a little confused. The two smaller
>>jets on top seem to be plugged up. Do these small jets
>>have a hole through from the top to bottom, or does the
>>fuel flow in at the holes in the side (emulsion tube)
>>and out through the bottom? The manual has several
>>diagrams, but doesn't really say how the fuel(or air)
>>flows through the small jets.
>>Thanks,
>>Andy
>
>_________________________________________________________________
|