Gordon,
All of the 67.5 cars had the same hole in the transmission tunnel since the
shift boot and dust covers were attached to the shift plate. As long as
the shift plate is the one for the trans the it works.
The hole in the trans tunnel is quite long and accomodates both the 4 speed
and 5 speed shift lever locations.
Stan
BTW I have a few 5 speed shift plates for sale.
============
At 08:47 PM 12/8/99 -0800, Gordon Glasgow wrote:
>No, the 5-speed and 4-speed are different lengths. The hole in the tunnel
is in
>a different location.
>
>shifty wrote:
>
>> > From: Fred_Katz@ci.sf.ca.us
>>
>> > And the shifter holes on the trans tunnel are spaced differently.
>>
>> I believe the 67.5 1600 and 2000 shifter holes are the same, the plate that
>> goes over them are different.
>>
>> San Francisco
>
>--
>Gordon Glasgow
>http://www.gordon-glasgow.org
>
>
>
>
|