To: | cak@dimebank.com, chapman-era@autox.team.net, gusmach@shore.net |
---|---|
Subject: | Re: Polyurethane bushings |
From: | cak@dimebank.com (Chris Kantarjiev) |
Date: | Tue, 2 Feb 1999 09:23:29 -0800 |
(Reuse the steel sleeve, that is. You want the bolt to clamp the steel in place, and the delrin to slide on the sleeve; I tend to lubricate on assembly with silicone grease, and often modify the whole fixture to take a zerk for future lube. Never done this particular location, though.) |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Polyurethane bushings, Chris Kantarjiev |
---|---|
Next by Date: | RE: Polyurethane bushings, Dave Billings |
Previous by Thread: | Re: Polyurethane bushings, Chris Kantarjiev |
Next by Thread: | RE: Polyurethane bushings, Dave Billings |
Indexes: | [Date] [Thread] [Top] [All Lists] |