RE: Engine outlet hose for Lotus Europa

["MarkJRosenbaum" <MarkJRosenbaum@uneedspeed.net>]

Gary Dunn wanted an engine outlet hose for his Lotus, 6" long
overall with ODs of 1+1/4" and 1+3/8",  the diameter to change at
3" from either end.

I don't know offhand if that sort of hose is available, but
perhaps you might see if a local muffler or plumbing shop could
make up a short bit of pipe that mated to 1+1/4" and 1+3/8"
hoses.  You could then finish off with two short straight lengths
of hose.

Mark Rosenbaum    Kingman AZ