Thanks John.
Do they really make 6 way connectors and if so, do you have a good
source? I have seen double ones (4 connectors), but never one that has
any more than that. I like the approach.
Jay Peterson
John Seim wrote:
>
> Pre-tinning is a very good idea. Less possibility of a stray wire.
> Purchase some bullet connectors and a six way connector. Solder the bullet
> connectors onto the five wires that are to go to one terminal. Make a sixth
> wire, to go from the six way connector to the position. I do this on the
> ignition switch, where they are tryig to put four wires under one screw.
>
> John Seim
/// british-cars@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|