>From the responses on this subject it sounds like others have had much
better luck with Lucas than I have had, so maybe it has been operator
error in my case. With this in mind, can anyone provide a good way to
attach the wires to the fuse box on a '56 AC Ace? The car is being
completely redone so the box and the harness are new, but it seems there
should be a better way to attach the wires than stripping the wire,
sticking it in the slot, and the clamping it down.I was thinking about
pre-tinning (solder actually) the wires and then clamping them, but with
5 wires going to one of the positions, that may make it impossible to
clamp. TIA for any help and if there are any listers with an Ace or
Cobra, I would love to contact you directly as I am having trouble
figuring out wire routing, relay locations, etc and would like to talk
to soemone who has a car close by that could check on things
periodically.
Thanks,
Jay Peterson
/// british-cars@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|