Thanks John, Bob and Chris for your responses...Seems like I'll be staying
with the 3.7.
I'm feeling a bit lame at the moment...I checked the rear end as described by
John (both wheels off the ground) then as described by Bob (one wheel off the
ground) and in both cases the drive shaft turned a little bit (10 degrees
maybe) past TWO turns for one turn of the wheel...what gives? Did I do
something wrong?
Thanks,
Greg
----- Original Message -----
From: Greg Schuett
To: british-cars@autox.team.net
Sent: Saturday, November 17, 2001 11:17 AM
Subject: R&P Ratios for OD TR-4
Folks,
I'm in the process of converting my '64 TR-4 to overdrive. All my reference
materials say that the OD version came with a 4.1:1 rear end. Does anyone
know how I can determine the rear end ratio that's currently in the car? I'm
pretty sure its the standard 3.7:1 version...If so, any thoughts on just using
that or do I really want to go to the 4.1:1?
Also, does anyone know where the OD relay box (not the solenoid, but the
relay that sits between the OD column swith and the power source) is supposed
to be mounted?
Thanks,
Greg Schuett
|