Edelbrock 1806, I think with thunder series electric choke and idle
stop solenoid.
Kevin Hand
#462
Sent from my iPhone
On Sep 27, 2009, at 3:10 PM, Bricklin0095@aol.com wrote:
> I also use the Edelbrock 1406 carb. I use the edlebrock performer
> intake
> also.. The original intake on the 360 is a spreadbore style. The rear
> holes are larger than the front. The 1406 carb is a square bore.
> The holes are
> the same size.. You need an adapter plate to mix them.Also need the
> Chrysler kick down adapter to use on an automatic.
>
>
> -----Original Message-----
> From: serge.ber@sympatico.ca
> To: bricklin@autox.team.net
> Sent: 9/27/2009 9:01:05 A.M. Eastern Daylight Time
> Subj: [Bricklin] 360 carb
>
>
> who replaced there carb on 360 what did you used ..what brand did
> you used
> and
> part number if you can please ...was it perfect fit ...tks for
> info serge
> Bricklin@autox.team.net
> http://autox.team.net/mailman/listinfo/bricklin
>
> You are subscribed as bricklin0095@aol.com
>
> http://www.team.net/archive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Bricklin@autox.team.net
> http://autox.team.net/mailman/listinfo/bricklin
>
> You are subscribed as khand1486@earthlink.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Bricklin@autox.team.net
http://autox.team.net/mailman/listinfo/bricklin
http://www.team.net/archive
|