ba-autox
[Top] [All Lists]

Re: Trying to get more negative camber in Street Prepared

To: Larrybsp@aol.com
Subject: Re: Trying to get more negative camber in Street Prepared
From: "Jeremy Rine" <geratol@hotmail.com>
Date: Wed, 29 May 2002 20:35:35 +0000
I should of clarified "swap".  I meant switching the left upper control arm 
with the right upper control arm and vice versa.

-Jeremy

----Original Message Follows----
From: Larrybsp@aol.com
To: geratol@hotmail.com
CC: ba-autox@autox.team.net
Subject: Re: Trying to get more negative camber in Street Prepared
Date: Wed, 29 May 2002 16:15:41 EDT

from:larrybsp@aol.com (Larry Stark)

              NOT TRUE. The SP rules allow you to update and backdate parts 
as
long as no mods are required to effect the switch and the parts come from
cars listed on the same line in the SP classification listings.
                                                                         
Larry

In a message dated 5/29/02 12:45:32 PM Pacific Daylight Time,
geratol@hotmail.com writes:


 > I assumed for a while that I just couldn't use a camber kit but I found 
out
 > that on Hondas you can swap stock upper control arms with each other and
 > get
 > more caster that would result in more negative camber in turns. After
 > reading through the rules again it looks like swapping stock control arms
 > isn't allowed in the rules either.
 >
 >



_________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>