autox
[Top] [All Lists]

measuring wheel offsets

To: "autox mailing list" <autox@autox.team.net>
Subject: measuring wheel offsets
From: "Eric Linnhoff" <eric10mm@qni.com>
Date: Thu, 4 Feb 1999 09:01:44 -0600
Howdy, does anyone have a good repeatable and inexpensive method to measure
the backspacing of any wheel?

After I get the extra 2mm of offending hub material removed from my AR24
wheels at a machine shop, to make them a Stock Class Neon legal 35mm offset,
I will need to be able to prove that they are withing the allowed +-0.25" of
the stock wheels.

Thanks in advance.

See you on course.

Eric Linnhoff in KC
#69DS    TLS #13
'98 Neon R/T
<eric10mm@qni.com>

Take a ton of bolt and steel
A whole lotta sweat, a set of wheels.....On the Speedway.
The flag is down, pistons pound
Plenty of engines ripping around......On the Speedway.
-----------------------------------------------------------------------
"Speedway" by Elvis Presley


<Prev in Thread] Current Thread [Next in Thread>