--Boundary_(ID_dGYEnkALlCC/R/5QQ+vxyA)
I have a six point belt that uses the existing rear seat belt bolts and the
driver seat bolts. Just use longer bolts. The existing seat belts stay in
place and you can switch between the harness and the regular seat belt
whenever you want to.
Lloyd Wilson
100K Racing
93 Prelude VTEC
VTEC SPD
dale@botkin.org on 02/03/99 08:11:56 AM
To: autox@autox.team.net @ INTERNET
cc:
Subject: Schroth belts
While we're on the topic of harnesses in Stock class, is anyone using a
Schroth Rallye 4?
Though a bit pricey, this looks like a good solution for me, since it
beats the stock lap/shoulder belt and does not require any new holes or a
roll bar. My question is whether I can retain the stock driver's belt
with the Schroth harness in place. I don't want to have to wear a 4-point
while street driving, and I'd rather not swap out belts for racing.
Dale
--... ...-- -.. . -. ----- -..- .- ...
Dale Botkin, MCP
'98 Mustang coupe, GS
Whoomah!
--------------------------------------
--Boundary_(ID_dGYEnkALlCC/R/5QQ+vxyA)--
|