alpines
[Top] [All Lists]

Re: TigersUnited.com - Hub Puller

To: Steve Laifman <SLaifman@socal.rr.com>
Subject: Re: TigersUnited.com - Hub Puller
From: sosnaenergyconsulting <sosnaenergyconsulting@cox.net>
Date: Thu, 24 Oct 2002 12:39:33 -0700
Wow!  Nifty setup Dan--elegant, too.  My compliments.

And thanks to Steve for posting it to us.

Best Regards

David Sosna

Steve Laifman wrote:

> Tigers and 'Pines,
> 
> One of the most often read complaints about our cars is the difficulty 
> of removing rear hubs and axles, especially with the Alpine wire wheels 
> hub, and the resistance to hub movement with both cars.
> 
> We are very fortunate to be able to present Dan Walters' elegant 
> solution. A tool designed for making this job, much easier, while not 
> resorting to techniques that can damage axle threads.  It is also 
> designed to clear the Alpine wire wheel hub, as well as the initial 
> steps with LAT wheel cast hub centers in place.
> 
> It is posted in our "Technical Tips" section in "Restoration Tips" link. 
>  The latest articles are always on the end of the list.
> 
> http://www.TigersUnited.com/tech_tips/tips_rest.asp
> 
> Thank you Dan.
> 
> Steve

<Prev in Thread] Current Thread [Next in Thread>