To: | Matthew Trebelhorn <matttrebelhorn@netscape.net> |
---|---|
Subject: | Re: Question: head bolts |
From: | chuck nicodemus <armorseal@spiretech.com> |
Date: | Mon, 27 Aug 2001 07:48:18 -0700 |
Matt, I justr replaced mine , they were looking pretty corroded and old . I went to a good hardware store and purchased 8 bolts grade "8" and carfully measured them along the others. I found I couldn't get the exact lenghgt so just 1/4 " over I cut mine off and "first installed a new nut" then cut them to lenght and ground a slight shoulder on the thread. Then removed the new nut and fine fit the bolts BEFORE installing the head... My 2p chuck |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Watch your speed, Ian Spencer |
---|---|
Next by Date: | Re: Watch your speed, jumpin'jan |
Previous by Thread: | Re: Question: head bolts, Jarrid Gross |
Next by Thread: | RE: Question: head bolts, Brent Edinger |
Indexes: | [Date] [Thread] [Top] [All Lists] |