I don't have any record of this being answered, hopefully Dave got the info he
needed out of band.
I recently drained my system to fit new brake lines and I refilled and bled
the system last night. I used the entire contents of two 325ml bottles of
DOT5. The first one filled both chambers of the master cylinder. The second
one filled the plumbing with a small amount ending up on the bleed bottle. I
have bleed valves on all four corners so I don't have a lot of waste.
Stan
-----Original Message-----
From: 6pack-bounces+stan.foster=hp.com@autox.team.net
[mailto:6pack-bounces+stan.foster=hp.com@autox.team.net] On Behalf Of
forzion@maine.rr.com
Sent: Thursday, June 05, 2008 1:31 PM
To: 6pack@autox.team.net
Subject: [6pack] Brake Fluid Capacity
Hello List!
I am looking to switch to DOT 5 brake fluid and, with a small bottle running
about $8, I didn't want to buy much more than I had to. Can someone please
tell me about how much fluid it takes to flush and fill the system (brake
lines and reservoir)? Many thanks!
Cheers!
Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|