Stan;
Several listers DID write back, but none were as specific as your posting just
now. Thanks! I just bought three 12 oz. bottles of DOT 5. The VIP store by me
had to order it for me. Seems like DOT 5 use isn't all that common (not sure
why -- the expense?).I'm also planning on installing Speedbleeder screws on a
four corners. Anyway, thanks, Stan. I'll keep the third bottle in the trunk
along with the tool kit.
Dave
---- "Foster wrote:
> I don't have any record of this being answered, hopefully Dave got the info
>he needed out of band.
>
> I recently drained my system to fit new brake lines and I refilled and bled
>the system last night. I used the entire contents of two 325ml bottles of
>DOT5. The first one filled both chambers of the master cylinder. The second
>one filled the plumbing with a small amount ending up on the bleed bottle. I
>have bleed valves on all four corners so I don't have a lot of waste.
>
> Stan
>
> -----Original Message-----
> From: 6pack-bounces+stan.foster=hp.com@autox.team.net
>[mailto:6pack-bounces+stan.foster=hp.com@autox.team.net] On Behalf Of
>forzion@maine.rr.com
> Sent: Thursday, June 05, 2008 1:31 PM
> To: 6pack@autox.team.net
> Subject: [6pack] Brake Fluid Capacity
>
> Hello List!
>
> I am looking to switch to DOT 5 brake fluid and, with a small bottle running
>about $8, I didn't want to buy much more than I had to. Can someone please
>tell me about how much fluid it takes to flush and fill the system (brake
>lines and reservoir)? Many thanks!
>
> Cheers!
>
> Dave
_______________________________________________
Support Team.Net http://www.team.net/donate.html
6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack
http://www.team.net/archive
|