6pack
[Top] [All Lists]

Re: [6pack] TR6 exhaust

To: "6pack@autox.team.net" <6pack@autox.team.net>
Subject: Re: [6pack] TR6 exhaust
From: "Foster, Stan" <stan.foster@hp.com>
Date: Sat, 5 Jan 2008 15:17:10 +0000
Based on what I am reading here there is some demand for a TR6 system that
flows well, sounds appropriate for a street car driven on long trips (ie
doesn't require you to wear ear plugs), wont rust and can be put together with
a good off the shelf header and doesn't cost $2000.

It seems this can be done if you have the time and the resources and someone
local that can fabricate the missing bits (ie another Project) but if you want
to buy something as a system it is either going to be too loud (Monza) or too
inefficient (standard TR6) or too expensive for now (Rimmer).

Assuming you have a header and you have a SS muffler how difficult is it to
find someone that can fabricate the intermediate bits (pipe, brackets,
hangers) in SS ?

Stan



-----Original Message-----
From: 6pack-bounces+stan.foster=hp.com@autox.team.net
[mailto:6pack-bounces+stan.foster=hp.com@autox.team.net] On Behalf Of James
Henningsen
Sent: Saturday, January 05, 2008 9:23 AM
To: 'michael lunsford'; 6pack@autox.team.net
Subject: Re: [6pack] TR6 exhaust

Mike and others:



I am running a kingborne 6-3-1 stainless header into a single 2 < inch
custom pipe exhaust with a short dynamax turbo muffer.  It all runs down the
passenger side for a clean straight exit and better weight distribution when
driving alone :-) I had the system built at a local muffler shop with a
reputation for making great custom exhausts on hot rods.  The system
includes custom brackets that I can unscrew so the exhaust system can be
taken apart easily.  No welding!  It sounds great without being too loud and
the muffler is known for great flow.  I can easily swap out the rear muffler
section with a straight pipe when desired. I went with a single pipe system
based on performance numbers from J.K. Jackson.  FYI  My latest engine is a
68 TR250 motor that has been heavily modified.



Jim Henningsen

Maitland, FL

75 TR6
_______________________________________________
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

6pack@autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>