Where do I get a cap gasket? I'm having the same problem Jim described,
but with a fuel pump I rebuilt (using a TRF? kit --- I've had the kit so
long I'm not sure where I bought it!). The gasket doesn't seem to be quite
big enough. I've tightened the screw as much as I dare but still have a
small leak --- a little dampness and smell.
Thanks,
Cregg Cowan
71 TR6
At 07:33 PM 3/30/2003 -0500, Robert L. Gannon wrote:
>Crimp the fuel line to stop the flow. Remove the cover to the fuel pump,
>clean the area and replace with a fresh cap gasket. Replace and tighten down
>the cap. If you have over tightened the standard fine thread screw, drill
>out the old hole and re thread with the next size up.
>Robert L. Gannon
>trsix74@comcast.net
>TR6 1974 CF22956U
>TR3A 1960 TS70951L
>http://hometown.aol.com/twodzusfittings/myhomepage/auto.html
|