I purchased this one from Revington. It is only the bottom piece (no sides)
with the battery hold down brackets. Fit was OK as it took a little coaxing to
get an acceptable fit.
It was a better repro part than the %#%# doglegs at the boot.
The bottom piece actually has about a 1/2" lip on the sides and rear, so it
gives something to plug weld onto. It cost $65 USD ( not $45 like I told
Ronald). Looks like TRF is trying to make a pretty good profit, but if you
consider the freight cost from England..... I purchased mine along with some
other items to offset the freight fees.
Richard Seaton
----- Original Message -----
From: HalMorton@webtv.net
Sent: Sunday, March 09, 2003 3:56 PM
To: 6pack@autox.team.net
Subject: Re: Battery tray
Ronald, list, In the
latest mailing from TRF, the "tabloid" style newsletter, on page 9 they
list part # CAR2, a Battery Tray Repair Section. It is in the "Bulkhead
(Firewall) Details" section, mid page, left column. Also, Revington in
the UK lists a part # 815834C, "Centre panel- battery tray with battery
clamp lugs". Revington may well be where TRF is getting their part. I
have no direct knowledge of either of these parts- have never seen them
or talked to the suppliers about them, and NFI.
Hal Morton Pascagoula,
MS
|