I replaced my J-type overdrive with an A-type from Quantum
Mechanics at the beginning of this year and used a Landcrusier
through out bearing.
What are the issues with this bearing?
Thanks in advance.
Alan
From: rcotting@mgnet.ca
To: p.h.z@12move.nl
Copies to: 6pack@autox.team.net
Date sent: Tue, 16 Oct 2001 11:33:31 -0300
Subject: Re: clutch II
Send reply to: rcotting@mgnet.ca
> Peter - I'm sure that somewhere on the net there is a site with with the
> procedure you need but I strongly recommend you obtain the Bentley and/or
> Haynes manuals for your car from one of the usual sources. Replace
> everything you can reasonably afford when you have the tranny out. As my
> favorite British car specialist says: "Do it once and do it right". The
> bronze cross shaft sleeves are a good choice. Think about the right choice
> in release bearings. Six months ago, I would have said the Landcruiser
> bearing but, if you have been following this list there is now some
> controversy on that front.
>
> The main thing is - not to worry. Have fun.
>
> Rich C.
=======================
Alan Lindner
72' TR6
San Diego, CA
a.lindner@stratedge.com
|