[WPTA] Tr6 shift boot

[wjstash]

While I have the inside of my tr6 torn apart to install heat shielding, I thought I would try to address another problem I have.   It has a maxda 5 speed gear box (vitesse) which has a different shift leaver mechanism that a stock tr6.  No longer can a lower boot hold the upper boot in position.  Up to now  the gear shift boot just sort of hung there,  with a gap.   What would work would be to epoxy or otherwise glue the rubber boot/ leather gaitor to the pedestal itself.  If anyone out there can visualize what am talking about,  or is familiar with the problem Iam open for suggestions.  I tried modifying a lower boot but that didn't work.  There is nothing for the lower boot to mount to, and the shift lever has an offset which also causes issues.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/wpta/attachments/20260404/1b672518/attachment.htm>