[TR] Overriders Bumperetts

[keithstewart at bell.net]

David, take a look at an exploded diagram of the rear bumper (Moss, Rimmer Bros, TRF’s Green/Blue books, etc.) You will see that under the over-rider is a “rubber washer” and a bracket that joins the centre bumper piece to the corner pieces. That “rubber washer” should already be there but if not in good shape, you can get a replacement from most of the usual suppliers. That “rubber washer” is likely what you are referring to as a rubber strip. When I took the bumper apart on my wife’s TR6 (now gone to a new owner), I documented the hardware bits in a Word document and would be happy to send it along if you like. Once apart, just bolt back together without the over-riders and support brackets.

 

 

Keith Stewart

 <mailto:keithstewart at bell.net> keithstewart at bell.net

 <https://keith-stewart.ca/> https://keith-stewart.ca/

 

 

 

From: David P <frogeye at porterscustom.com> 
Sent: July 31, 2025 1:34 PM
To: triumphs at autox.team.net
Subject: Re: [TR] Overriders Bumperetts

 

sorry, 76 TR6   I guess the rear bumpers only, the fronts appear to bolt directly to the bumper.. 

On 7/31/2025 10:13 AM, TeriAnn J. Wakeman wrote:

On 7/31/25 8:58 AM, David P wrote:

Folks, A lot of you have removed the Overriders and have replaced with a rubber strip on the split bumpers. Is there a kit offered somewhere? Directions to appreciated. Dave P

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20250731/7eb83697/attachment.htm>