[TR] Cam Lift

[bill beecher]

Could have been but I am thinking probably came from Moss USA in Calif.  PO had sent the motor to a shop in SoCal to be rebuilt but knows nothing about what the guy did.  I’m not sure he didn’t swap this TR4a motor in and call it good.  Whatever he did is OK with me, car runs great and no leaks, just wish he had put a TR4 trans in too.

Bill

 

From: Don Hiscock <don.hiscock at gmail.com> 
Sent: Friday, December 26, 2025 7:10 PM
To: Bill Beecher <bill_beecher at flash.net>
Cc: Triumps On TeamNet <triumphs at autox.team.net>
Subject: Re: [TR] Cam Lift

 

Aluminum head?  Wasn't that a project funded by the TR Register IUK) Spares Development Fund twenty or thirty years ago.  I believe Moss Europe had exclusive selling rights.

 

On Fri, Dec 26, 2025 at 4:25 PM Bill Beecher <bill_beecher at flash.net <mailto:bill_beecher at flash.net> > wrote:

 

“The harder I work, the luckier I get”  H Ford


On Dec 26, 2025, at 5:11 PM, Bill Beecher <bill_beecher at flash.net <mailto:bill_beecher at flash.net> > wrote:

Wondering if the PO had a cam of some sort installed.  My TR3 has a ‘66 TR4a motor with an aluminum head and roller rockers(not sure of what lift these are either).  

 

What are the measurements and what is the best way to take those measurements?

 

Many thanks,

Bill B

TS30766L

 

“The harder I work, the luckier I get”  H. Ford

** triumphs at autox.team.net <mailto:triumphs at autox.team.net>  **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autoxteam.net/mailman/options/triumphs/don.hiscock@gmail.com <http://autox.team.net/mailman/options/triumphs/don.hiscock@gmail.com> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20251227/7ce50f57/attachment.htm>