[TR] Cam Lift

[Don Hiscock]

Aluminum head?  Wasn't that a project funded by the TR Register IUK) Spares
Development Fund twenty or thirty years ago.  I believe Moss Europe had
exclusive selling rights.

On Fri, Dec 26, 2025 at 4:25 PM Bill Beecher <bill_beecher at flash.net> wrote:

>
> “The harder I work, the luckier I get”  H. Ford
>
> On Dec 26, 2025, at 5:11 PM, Bill Beecher <bill_beecher at flash.net> wrote:
>
> Wondering if the PO had a cam of some sort installed.  My TR3 has a ‘66
> TR4a motor with an aluminum head and roller rockers(not sure of what lift
> these are either).
>
> What are the measurements and what is the best way to take those
> measurements?
>
> Many thanks,
> Bill B
> TS30766L
>
> “The harder I work, the luckier I get”  H. Ford
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/don.hiscock@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20251226/100f33f3/attachment.htm>