[TR] TR6 engine reinstall

[Paul Tegler]

...gotta' drop the shift lever to move the tranny back 4"

ptegler

On 8/12/2024 6:26 PM, Tony Drews wrote:
>
> That can work.  The transmissions will interfere with the pressure 
> plate unless the trans is like 4 inches back (maybe less), but if you 
> get the engine lined up with the trans it can go in with less clearance.
>
> Install manifolds, and fan after engine is in.  Dizzy can be in place 
> but it's safer to have it out and the hole plugged with a rag or 
> something.
>
> My experience is with a TR4 not a 6, but should be applicable.
>
> Regards, Tony
>
> On 8/11/2024 6:40 PM, dave northrup wrote:
>>
>> I’m thinking if I move the tran back a few inches (disconnect the 
>> driveshaft and tran mount),  then we can slide the tran back into the 
>> engine.
>>
>> Does this make sense or am I missing something?
>>
>> I’m thinking we will install the carbs and exhaust manifold after 
>> engine is in place.
>>
>> I’m bringing you the alternator, coil, dizzy, engine mounts, fan belt, ??
>>
>> I’m thinking I should add the fan after the engine is in.  it’s brand 
>> new; don’t want to damage it.
>>
>>
>> **triumphs at autox.team.net  **
>>
>> Donate:http://www.team.net/donate.html
>> Archive:http://www.team.net/pipermail/triumphs   http://www.team.net/archive
>>
>> Unsubscribe/Manage:http://autox.team.net/mailman/options/triumphs/tony@tonydrews.com
>
> **triumphs at autox.team.net  **
>
> Donate:http://www.team.net/donate.html
> Archive:http://www.team.net/pipermail/triumphs   http://www.team.net/archive
>
> Unsubscribe/Manage:http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net

-- 
Paul Tegler
ptegler at verizon.net   www.teglerizer.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20240812/ca1ce9fd/attachment.htm>