[TR] TR6 engine reinstall

[Tony Drews]

That can work.  The transmissions will interfere with the pressure plate 
unless the trans is like 4 inches back (maybe less), but if you get the 
engine lined up with the trans it can go in with less clearance.

Install manifolds, and fan after engine is in.  Dizzy can be in place 
but it's safer to have it out and the hole plugged with a rag or something.

My experience is with a TR4 not a 6, but should be applicable.

Regards, Tony

On 8/11/2024 6:40 PM, dave northrup wrote:
>
> I’m thinking if I move the tran back a few inches (disconnect the 
> driveshaft and tran mount),  then we can slide the tran back into the 
> engine.
>
> Does this make sense or am I missing something?
>
> I’m thinking we will install the carbs and exhaust manifold after 
> engine is in place.
>
> I’m bringing you the alternator, coil, dizzy, engine mounts, fan belt, ??
>
> I’m thinking I should add the fan after the engine is in.  it’s brand 
> new; don’t want to damage it.
>
>
> **triumphs at autox.team.net **
>
> Donate:http://www.team.net/donate.html
> Archive:http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>
> Unsubscribe/Manage:http://autox.team.net/mailman/options/triumphs/tony@tonydrews.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20240812/25972701/attachment.htm>