[TR] TR250 windshield trim question.

[Roger Elliott]

What I found to be very useful on my GT6, which has the same windshield, 
is the Gunson trim tool.  It is available from various sources.

I spend several hours over the course of a week trying to get the trim 
in using various methods. Once I used this, it took me about 1/2 hour.


Roger Elliott

On 9/1/2023 10:53 AM, Tom Fansher wrote:
>
> Ok helping a buddy. The windshield is installed and now for the chromed plastic finisher. It doesn’t want to “slip” into the groove in the black rubber glazing. The groove is REALLY tight. Any suggestions from TR4, 250 or Tr6 guys?  Stuff cord into the groove and apply heat?
> TIA
> Tom Fansher
> 61 TR3
> 62 TR4
>
> Sent from my iPhone
> **triumphs at autox.team.net  **
>
> Donate:http://www.team.net/donate.html
> Archive:http://www.team.net/pipermail/triumphs   http://www.team.net/archive
>
> Unsubscribe/Manage:http://autox.team.net/mailman/options/triumphs/elliottr@rmi.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230901/afb0ba81/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: BsLiFxVlnruZcdq3.png
Type: image/png
Size: 123031 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230901/afb0ba81/attachment.png>