[TR] Is this symptom I'm getting indicative of a bad front wheel bearing?

[Sujit Roy]

Just an update.
I was able to take a look at the car this weekend. I jacked up the front of
the car. Someone suggested that I rotate the wheel and see if the spring
vibrates. I tried this but nothing. I did, however, tighten up the right
hand hub. The Stag's ROM says to tighten the nut to 5 lbf ft and undo the
nut one flat and insert a split/cotter pin. I did this, but after assembly
I could feel a wobble. I then tightened to 5 lbf ft and then slacked off
the nut until I could insert the pin. The hub rotates.
At the same time, I swapped out the front wheels and replaced them with a
spare set.
I'm yet to test drive the car.
Sujit
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230306/936a8b8d/attachment.htm>