<div dir="ltr"><div>Just an update.</div>I was able to take a look at the car this weekend. I jacked up the front of the car. Someone suggested that I rotate the wheel and see if the spring vibrates. I tried this but nothing. I did, however, tighten up the right hand hub. The Stag's ROM says to tighten the nut to 5 lbf ft and undo the nut one flat and insert a split/cotter pin. I did this, but after assembly I could feel a wobble. I then tightened to 5 lbf ft and then slacked off the nut until I could insert the pin. The hub rotates.<div>At the same time, I swapped out the front wheels and replaced them with a spare set. </div><div>I'm yet to test drive the car.</div><div>Sujit<br></div></div>