[TR] How to apply a Moss decal

[DAVID MASSEY]

 I remember that in my youth I built several plastic models that included decals that were water-activated.  I know I have applied these decals to my TR6 escutcheons but I forget exactly what I did but it is likely that I used the same technique. Dip it in water and apply to the surface and let it dry.
 
Dave 


 
 
-----Original Message-----
From: Anthony Rhodes <spamiam at comcast.net>
To: triumphs at autox.team.net
Sent: Mon, Jun 19, 2023 7:52 pm
Subject: [TR] How to apply a Moss decal

I have a Moss decal for the lighting switch that gets applied to the escutcheon at the steering wheel on my TR4A.  The decal came with no instructions.  None on the moss webpage about this decal either

It is not obviously a “peel and stick”. I can’t tell if it is a like the old fashioned model decals that get soaked in water and floated off

Anybody know how to make this work.  I’d rather not destroy it in my attempts to use it and then have to order a new one!!!

I am in digest mode, so please also reply directly to me, if possible.

-Tony
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230620/4d055244/attachment.htm>