[TR] 1972 Triumph TR6

[Brian Kemp]

I use a machine screw about 2 inches long.  Screw it in the hole in the grease cap and it will contact the end of the stub axle and push the cap off nice and easy.  I think it is a #10 or #12 thread.  If your center hole is already messed up, you might be able to use a tap and put a thread or two in.  No damage and the cap will go right back in.

Brian
-----Original Message-----
From: dave northrup <dave at ranteer.com>
Sent: Dec 21, 2023 3:17 PM
To: triumphs at autox.team.net <triumphs at autox.team.net>
Subject: [TR] 1972 Triumph TR6

How do i get the front wheel grease caps off? They are in there really well. Do i have to destroy them?