[TR] TR3 door stud

DAVID MASSEY dave1massey at cs.com
Sat Aug 5 06:06:45 MDT 2023


Or epoxy.  Or bondo.  I guess just about anything will work.
Another thought: wrap some teflon tape around the stud's threads to fill the gap.

Dave 


 

    On Friday, August 4, 2023 at 05:38:35 PM CDT, dave northrup <dave at ranteer.com> wrote:  
 
 
Let me try again.
 
  
 
One the outside of the doors are studs that the bottom of the side curtains snap into.  These studs go through the metal door and into the wood frame inside the door.  This one is completely stripped and just falls out.  since its wood that the stud screws into, I was thinking plastic wood or something like that.  or JB weld.

  
 
  
 
On Friday, August 4, 2023 at 01:49:29 PM CDT, dave northrup <dave at ranteer.com> wrote:
 
  
 
  
 
TR3a, one of the door studs is loose.  Very loose.  This would be where the tonneau lift a dots snap in for the tonneau along the outside.
 
 
 
Jb weld?  Wood putty?  Glue?  What’s a good solution here?
 
**triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
 ** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20230805/3bbf05d0/attachment.htm>


More information about the Triumphs mailing list