[TR] Looking for information on the connector polarity on a positive ground voltage stabilizer.

[Don Hiscock]

...and here's the original one on my April 1962 TR3B.
https://photos.smugmug.com/photos/i-7mKMVvS/0/8890db71/X5/i-7mKMVvS-X5.jpg


On Mon, Oct 17, 2022 at 12:30 PM Don Hiscock <don.hiscock at gmail.com> wrote:

> I believe earlier ones were screw-down lugs on bare wire ends and later
> ones were 0.250 Lucar connectors like your negative ground reference.
>
> On Mon, Oct 17, 2022 at 12:24 PM Dave Connitt <dconnitt at fuse.net> wrote:
>
>> Can anyone tell me anything about the electrical connectors on a positive
>> ground voltage stabilizer. For example on a negative ground voltage
>> stabilizer, the “B” (battery) input is 2 male .250” push on tabs and the
>> “I” (instrument) output is 2 female .250” push on tabs.
>> Thanks,
>> Dave Connitt
>>
>> Sent from my iPhone
>> ** triumphs at autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs
>> http://www.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/don.hiscock@gmail.com
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20221017/b9b9607f/attachment.htm>