[TR] Was TR3a Smith's heater fan ground wire

[James Henningsen]

I agree on the heater core. Very fragile after all these years. When mine goes I am putting in a new unit from Macys Garage.  Very nice unit!  
Jim Henningsen
Ocala FL
61 3A
67 4A
75 6
81 8

> On May 29, 2022, at 8:14 PM, auprichard uprichard.net <auprichard at uprichard.net> wrote:
> 
> 
> I normally test them to about 7 or 8 psi (I realize they should not see more than 4, but I like the comfort zone).  If they hold pressure and look good, I will use them. Failing that, I find it best to go find another or buy new.  From what I have heard, they are extremely difficult to repair and prone to future problems.  And, unlike a radiator leak, a leaking heater core (a) is a pain to replace and (b) will make a mess on what are frequently nice new carpets.
>  
> Regarding your question about the fan, the radiator people I know only like to deal with plumbing.  On the other hand, being a cardiologist, I can tinker with plumbing AND electricity – but patients were so much easier than Triumphs……….
>  
> Andrew
>  
> From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of David Friedlander
> Sent: Sunday, May 29, 2022 7:48 PM
> To: Art McEwen <artwmcewen at gmail.com>
> Cc: triumphs at autox.team.net
> Subject: [TR] Was TR3a Smith's heater fan ground wire
>  
>  
> Has anyone taken their TR3 heater to a radiator shop to recorded and rebuilt? Will they touch the fan portion or just deal with the core itself?
>  
> Thanks!!
>  
> Dave
>  
>  
> On Sun, May 29, 2022 at 7:09 PM Art McEwen <artwmcewen at gmail.com> wrote:
> It makes up for breaking the new power steering pump I was helping install on my BILs F150 last week.   
> 
> 
> On May 29, 2022, at 5:34 PM, DAVID MASSEY <dave1massey at cs.com> wrote:
> 
> 
> On a scale of one to ten this is about a .02.  I've committed a couple of goofs recently that were 12.5.  If you feel tempted to administer a dope-slap to your self, use just one finger.  And your pinky at that.
>  
> I wish all of my problems were that easy to resolve.
>  
> Good job!
>  
> Dave
>  
>  
>  
> -----Original Message-----
> From: Art McEwen <artwmcewen at gmail.com>
> To: triumphs at autox.team.net
> Sent: Sun, May 29, 2022 10:20 am
> Subject: Re: [TR] TR3a Smith's heater fan ground wire
> 
> Well that was almost too easy.   Turns out when I replaced the heater hoses last year I neglected to even re-attach the ground wire, it must have been lying against a convenient ground right up until last week.
>  
> On Sat, May 28, 2022 at 2:40 PM Art McEwen <artwmcewen at gmail.com> wrote:
> Any idea where it should be?   Fan stopped working soon after the OEM reostat failed (replaced by simple toggle) which was soon after one of the heater hoses cracked at the core side.    I'm assuming it's the fan that's shot but I'm willing to place a long shot bet on the ground wire before I tackle that job again.
>  
> Thanks,
> 
> Art
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/forzion7@gmail.com
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/trguy75@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20220529/3107c761/attachment.htm>