[TR] TR3A Overdrive lock washer alternative

[Art McEwen]

The little tab washers (#20 below) over the bridge bars that lock the
operating pistons in place are N/A.    I've got grade 5 nyloc nuts that
theoretically shouldn't need them but they're only grade 5 vs. the original
gr8 nuts.   I've heard others have used this as a substitute.

Should I be concerned?  I know there are some high pressures involved
inside the O/D but not sure about this location.

https://mossmotors.com/triumph-tr2-3-4/clutch-gearbox-drivetrain/overdrive

Cheers,

Art.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20220123/c7d79e95/attachment.htm>