[TR] TR6 Zenith Stromberg Carbs

[Sujit Roy]

3.5 turns on mine from end to end. Maybe yours has come off.

On Mon, Nov 15, 2021, 2:33 PM Sujit Roy <triumphstag at gmail.com> wrote:

> I'm my case on my Stag . Same carbs. The star washer was missing so the
> needle didn't move up or down. Maybe ur star washer is not fully seated.
>
> On Mon, Nov 15, 2021, 11:57 AM Henningsen, James D. <henningj at cf.edu>
> wrote:
>
>> Ok, it’s been a while since I’ve adjusted the mixture on my ZS 175 CD-2
>> carbs on my TR6.  I have the adjustable B1AF needles,  removed damper from
>> carb body, removed the fixing screw from the piston damper side.  I insert
>> the special tool into the damper tube to turn the needle assembly and it
>> engages the hex socket hole.  I can rotate left and right but it doesn’t
>> move the height of the needle face on the bottom of the damper no matter
>> which way I turn.    If I pull the needle down from the damper to its
>> lowest spring position and then turn left or right, the needle seat height
>> does move up and down.   I don’t recall having to hold the needle out to
>> adjust mixture.  I also can’t easily find the fully lean or rich stop
>> points easily.  Ten turns seems a bit much.
>>
>> Any thoughts greatly appreciated.  Trying to get my refreshed 6 back on
>> the road from a major engine drivetrain upgrade. Thanks I advance
>>
>> Jim Henningsen
>> Ocala FL
>> ** triumphs at autox.team.net **
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs
>> http://www.team.net/archive
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/triumphstag@gmail.com
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20211115/4d156e2c/attachment.htm>