[TR] TR6 Zenith Stromberg Carbs

[Sujit Roy]

I'm my case on my Stag . Same carbs. The star washer was missing so the
needle didn't move up or down. Maybe ur star washer is not fully seated.

On Mon, Nov 15, 2021, 11:57 AM Henningsen, James D. <henningj at cf.edu> wrote:

> Ok, it’s been a while since I’ve adjusted the mixture on my ZS 175 CD-2
> carbs on my TR6.  I have the adjustable B1AF needles,  removed damper from
> carb body, removed the fixing screw from the piston damper side.  I insert
> the special tool into the damper tube to turn the needle assembly and it
> engages the hex socket hole.  I can rotate left and right but it doesn’t
> move the height of the needle face on the bottom of the damper no matter
> which way I turn.    If I pull the needle down from the damper to its
> lowest spring position and then turn left or right, the needle seat height
> does move up and down.   I don’t recall having to hold the needle out to
> adjust mixture.  I also can’t easily find the fully lean or rich stop
> points easily.  Ten turns seems a bit much.
>
> Any thoughts greatly appreciated.  Trying to get my refreshed 6 back on
> the road from a major engine drivetrain upgrade. Thanks I advance
>
> Jim Henningsen
> Ocala FL
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/triumphstag@gmail.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20211115/c3ee69f4/attachment.htm>