[TR] Grade 2 lock nuts

[DAVID MASSEY]

 I wouldn't use anything lower than Grade 5.  I used some common hardware store (Grade 2) bolts and nuts on my MGB driveshaft once  and they lasted less than a month.  This was a long time ago and I was still learning.
 
Dave 

 
 
-----Original Message-----
From: Sujit Roy <triumphstag at gmail.com>
To: Triumphs <triumphs at autox.team.net>
Sent: Fri, May 14, 2021 12:57 am
Subject: [TR] Grade 2 lock nuts


I need to replace the lock nuts uses to hold the diff flanges to the drive shafts on my stag. Can I use grade 2 nuts? Granger has some on clearance. I'm assuming basic nuts and bolts used Triumphs were grade 3 .
Sujit** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210514/5240231c/attachment.htm>