[TR] clutch salve cylinder on TR6 and TR250 UKC8677

[dave]

+1 on BPNW

 

From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of Paul Tegler
Sent: Sunday, January 10, 2021 7:59 AM
To: triumphs at autox.team.net
Subject: Re: [TR] clutch salve cylinder on TR6 and TR250 UKC8677

 

...personally I've found BPNW seems to carry better quality parts than many of the better known suppliers these days.
Example... last Spit resto... the outer door window seals from them actually had the felt on the back (against the glass) not just plain rubber.
And the furflex door seals actually were large enough to properly clip over the seam and capture the edge of the carpet properly with a seal
flexible enough to not impede the door closure....

ptegler

On 1/10/2021 2:39 AM, Sujit Roy wrote:

Anyone got any experience using this cheaper cylinder from BPNW? I need it for a Stag and it shares the same part no. 

 

https://www.bpnorthwest.com/clutch-slave-cylinder-tr250-tr6.html


 

Regards, Sujit

-- 

Sujit Roy
Cupertino, California


https://triumphstagblog.wordpress.com/





** triumphs at autox.team.net <mailto:triumphs at autox.team.net>  **
 
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
 
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net

-- 
Paul Tegler
ptegler at verizon.net <mailto:ptegler at verizon.net>   www.teglerizer.com <http://www.teglerizer.com> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210110/40604c2e/attachment.htm>