[TR] Triumphs Digest, fenders

[fred zampa]

 jim  :    i live in macon ga -not far from ocala.
            i have tr4a fenders (and most  of the rest of the car )  for sale.  i also have tr3 and a few tr6 body parts.   contact me if you are interested and i will check the condition --which i remember as being good.
fred       478 785 0275.        fredzampa at yahoo.com
        
    On Monday, January 4, 2021, 02:03:43 PM EST, triumphs-request at autox.team.net <triumphs-request at autox.team.net> wrote:  
 
 Send Triumphs mailing list submissions to
    triumphs at autox.team.net

To subscribe or unsubscribe via the World Wide Web, visit
    http://autox.team.net/mailman/listinfo/triumphs
or, via email, send a message with subject or body 'help' to
    triumphs-request at autox.team.net

You can reach the person managing the list at
    triumphs-owner at autox.team.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Triumphs digest..."
Today's Topics:

  1. Tr4a parts need (Jim Henningsen)
  2. Re: Triumphs Digest, Vol 14, Issue 2 (Lee&John Howard)
  3. TR4 Part (1964) (EMAIL VALIDATION)
Looking for good used rear fenders, trunk lid, for TR4 or 4a.  Hoping in the southeast as I am in Florida and really don’t want to ship.  But open to offers.  Thanks.
Jim Henningsen 
Ocala, FL


Thanks all who responded to my windshield question.
Ed - my seal is stretched around the corners but very slack top and bottom, as well as being bowed at the ends. I don't see how I can set it down on the pinch with it flopping that way. 
The packaging for the seal says Uroparts 913442, which comes up on Amazon as meant for a TR4, but is no longer available on the Europarts site itself.I'll talk to Moss tomorrow and see where they source their seals.john

On Sun, Jan 3, 2021 at 11:04 AM <triumphs-request at autox.team.net> wrote:

Send Triumphs mailing list submissions to
        triumphs at autox.team.net

To subscribe or unsubscribe via the World Wide Web, visit
        http://autox.team.net/mailman/listinfo/triumphs
or, via email, send a message with subject or body 'help' to
        triumphs-request at autox.team.net

You can reach the person managing the list at
        triumphs-owner at autox.team.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Triumphs digest..."
Today's Topics:

   1. TR4 Windshield Install (Q)



---------- Forwarded message ----------
From: Q <HDRider570 at att.net>
To: triumphs at autox.team.net
Cc: 
Bcc: 
Date: Sat, 2 Jan 2021 16:15:25 -0800
Subject: [TR] TR4 Windshield Install
All the TR4 windshield mounting rubbers I have used required a bit of 
stretching to get over the corners of the glass.  That did not stop the 
seal from being a bit bowed along the vertical edges.  I would say that 
if the corners are loose then you have the incorrect mounting rubber.

A Herald uses the same type of seal but the windshield is about two 
inches taller so the seal is about four inches longer.


Edward Hamer

Petaluma CA


_______________________________________________

Triumphs mailing list
Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs



-- 


 415 891 8406        
I am looking for an original cover for the fuse box. I just need the cover.I bought a complete replacement from Moss, but it does not function like the old one.
Any suggestions?
Tim PurdySusanville, CA

_______________________________________________

Triumphs mailing list
Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210107/06f1e12c/attachment.htm>