[TR] Making brake pipes

[Paul Tegler]

At least in my area, NAPA carries a complete line of just the fittings 
both 'merican and metric

ptegler

On 1/6/2021 7:28 PM, Sujit Roy wrote:
> I bought a good brake pipe flaring tool for rebuilding some hydraulic 
> hoses for my Stag's rack. So far I have managed to reuse some flares.
> I may need some new flares but am finding them very expensive here in 
> USA. UK have some but shipping costs add up.
> I need 7/16 x 20 for 1/4" tubing to make bubble flares.
> If you make your own brake lines where do you go to get your 
> fittings?I bought a cu / nickel line kit that came with fittings I can 
> use.
> Regards, Sujit
>
> -- 
> Sujit Roy
> Cupertino, California
>
> https://triumphstagblog.wordpress.com/ 
> <https://triumphstagblog.wordpress.com/>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/ptegler@verizon.net

-- 
Paul Tegler
ptegler at verizon.net  www.teglerizer.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210106/20db2659/attachment.htm>