[TR] Fitting an electric fuel pump

[DAVID MASSEY]

 The best place is back near the tank but that means running a wire back there to run it.  I ran one on my TR6 for many years mounted to the side of the block where the old mechanical pump was (blanked off, of course).  Either works well enough.
I suggest you buy an impact switch.  They can be had for pretty cheap at the breaker's yard.
 
Dave 

 
 
-----Original Message-----
From: Stuart Greenwood <sagreenwood at att.net>
To: triumphs at autox.team.net
Sent: Tue, Feb 9, 2021 7:43 pm
Subject: [TR] Fitting an electric fuel pump

I would like to fit an Electric fuel ump to my TR250 . Has anyone done this? If so where did you install it?

Stuart A Greenwood
TR250
1971 Spitfire Mk IV
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20210210/a77a9c52/attachment.htm>